Operating Leds On The Acm - Danfoss VLT MSD 510 Operating Manual

Operating Guide | VLT® Multiaxis Servo Drive MSD 510 System

7.2.4 Operating LEDs on the ACM 510

STATUS ACM
DEV
CAP ST
NET ST
LINK/ACT
X1
X2
Illustration 112: Operating LEDs on ACM 510
Table 27: Operating LEDs on ACM 510
LED
DEV
CAP ST
NET ST
LINK/ACT X1
(Link/activity of In)
LINK/ACT X2
(Link/activity status of Out)
152 | Danfoss A/S © 2019.10
Color Flash status
Green On
Flashing
Red On
Flashing
Green On
Flashing
Off
Green On
Orange On
Red Flashing
On
Green On
Flashing
Off
Green On
Flashing
Off
Description
Device is in state Operation enabled.
Device is in state Standby or Power-up.
Device is in state Fault or Fault reaction active.
DC-link is not applied at the input.
Capacitors fully charged.
Capacitors charging/discharging.
Capacitors discharged.
Connected.
Online.
Initialization.
Initialization failed or other error.
Ethernet link established.
Ethernet link established and active.
No link.
Ethernet link established.
Ethernet link established and active.
No link.
AQ262450196490en-000101 / 175R1170
Operation