Danfoss VLT MSD 510 Operating Manual page 119

Operating Guide | VLT® Multiaxis Servo Drive MSD 510 System
Procedure
1. Open menu [PLC → Ethernet → Edit Ethernet Node].
2. In the next window, click on Browse.
Illustration 84:
All accessible Ethernet nodes are shown in this window.
The ISD 510 servo drives are listed under device type VLT® ISD 510.
The DSD 510 servo drives are listed under device type VLT® DSD 510.
The SDM 511/SDM 512 servo drive modules are listed under device type VLT® SDM 510.
3. Select the desired servo drive and click on OK (use the Flash button to identify the specific servo drive).
Danfoss A/S © 2019.10
Edit Ethernet Node
Commissioning
AQ262450196490en-000101 / 175R1170| 119