Setting The Ibmc Ip Address - Huawei FusionServer Pro 2288H V5 User Manual

FusionServer Pro 2288H V5 Server
User Guide
4.
Step 4 Query health status.
1.
2.
Step 5 Query alarm information.
Check whether any alarm is generated.
l
l
----End

7.4.5 Setting the iBMC IP Address

Scenarios
This section describes how to set the iBMC IP address on the BIOS.
You can set the iBMC IP address on:
l
l
l
Default IP Address
Default IP Address
192.168.2.100
Issue 08 (2019-10-30)
Upgrade the iBMC, BIOS, or CPLD.
For details, see FusionServer Pro Rack Server Upgrade
On the menu bar, choose Information.
In the navigation tree, choose Overview to query the health status.
Figure 7-31 Querying health status
If yes, handle the alarms.
For details, see FusionServer Pro Rack Server iBMC Alarm
If no, no further action is required.
BIOS
iBMC WebUI
For details, see FusionServer Pro Rack Server iBMC User
iBMC CLI
Run the following command: ipmcset -d ipaddr
For details, see FusionServer Pro Rack Server iBMC User
Copyright © Huawei Technologies Co., Ltd.
7 Installation and Configuration
Guide.
Handling.
Guide.
Guide.
Default Subnet Mask
255.255.255.0
108