Instrument Status Bar - Agilent Technologies ENA Series User Manual

Overview of Functions
Screen Area: Names and Functions of Parts

4. Instrument Status Bar

The instrument status bar displays the status of the entire instrument.
Figure 2-5 Instrument status bar
4-1. Instrument Message/Warning
Displays instrument messages and warnings. Instrument messages are displayed in gray
and warnings in red. For the meanings of the instrument messages and warnings, see
Appendix B, "Troubleshooting," on page 607.
4-2. Display Update OFF Indicator
When updating of information displayed on the LCD screen is turned off, this indicator is
displayed.
4-3. Rf Output OFF Indicator
When the stimulus signal output is turned off, this indicator is displayed.
4-4. Measurement Status
Displays the measurement status of the E5070B/E5071B.
Setup
Hold
Init
Man
Ext
Bus
Meas
4-5. VBA Status
Displays the state of the execution of the VBA program in the E5070B/E5071B.
Run
Stop
44
Setup for measurement in progress
Measurement on hold (idling)
Measurement being initialized
The trigger source is set to "Manual" and waiting for trigger.
The trigger source is set to "External" and waiting for trigger.
The trigger source is set to "Bus" and waiting for trigger.
A measurement is in progress.
A VBA program is currently running.
A VBA program has stopped.
Chapter 2