Searching For Positions That Match Specified Criteria; Setting Search Range - Agilent Technologies ENA Series User Manual

Searching for Positions that Match Specified Criteria

You can search for a position that matches your specified criteria by using the Marker
Search feature.
Marker Search allows you to search for a position that matches any of the following
criteria.
Maximum value
Minimum value
Target (a point that has a target measurement value)
• Target nearest to marker position
• Target on left-hand side nearest to marker position
• Target on right-hand side nearest to marker position
Peak
• Maximum peak (for a positive peak), minimum peak (for a negative peak)
• Peak on left-hand side nearest to marker position
• Peak on right-hand side nearest to marker position

Setting search range

The Marker Search feature allows you to set part of the sweep range as the search target
(Partial Search feature) as well as the entire search range. For the Partial Search feature,
you can select whether to couple traces in the channel.
Procedure to Turn On/Off Trace Coupling within Search Range
Step 1. Press or
search range.
Step 2. Press or
range.
Step 3. Press .
Step 4. Press
Search Range
Step 5. Press to toggle on/off trace coupling within the search range.
Couple
Chapter 6
Searching for Positions that Match Specified Criteria
to activate the channel for which you want to set the
to activate the trace for which you want to set the search
.
Data Analysis
263