Data Output
Saving and Recalling Instrument State
On the E5070B/E5071B, the following drives are available for saving/recalling files.
Select the appropriate drive from the
Drive
3.5" Floppy [A:]
[D:]
NOTE
Do not modify any files and folders in drives other than drive A: and drive D:. Doing
so will cause malfunctions.
NOTE
Do not press the disk eject button while the floppy disk access lamp is on. Trying to
forcefully pull the floppy disk out while the lamp is on may damage the floppy disk or disk
drive.
Typing in a file name from the front panel
You can enter a file name using the
when storing a file.
Figure 10-2
Input from Front Panel
356
Description
Select this drive when saving or recalling a file to/from a floppy disk
Select this drive when saving or recalling a file to/from the hard disk drive
(D drive).
*1.When using the built-in floppy disk drive on the E5070B/E5071B, insert a 1.44 MB
floppy disk formatted in DOS format.
pull-down menu shown in Figure 10-1
Save In
Input from the front panel
*1
.
buttons on the dialog box
Chapter 10