Searching For The Maximum And Minimum Measured Values - Agilent Technologies ENA Series User Manual

Searching for the maximum and minimum measured values

You can search for the maximum or minimum measured value on the trace and move a
marker to that point (Figure 6-8).
Figure 6-8 Searching for maximum and minimum measured values
Search for maximum
(
Max
Search for minimum
(
Min
Searching for Maximum and Minimum Values
Step 1. Following Step 1 to Step 4 in "Reading values on the trace" on page 253, activate the
marker you are using to search for the maximum and minimum values.
Step 2. Press
Step 3. Press the corresponding softkey to move the marker to the maximum or minimum
measured value.
Softkey
Max
Min
NOTE When the data format is in Smith chart or polar format, execute the search only for the
main response value.
Chapter 6
Searching for Positions that Match Specified Criteria
Move active marker to point on trace where measured value is
greatest
)
Move active marker to point on trace where measured value is
lowest
)
.
Function
Performs a search for the maximum value
Performs a search for the minimum value
Data Analysis
265