Changing Frequency Data - Agilent Technologies ENA Series User Manual

Figure 8-8 Avoid Spurious Function
You cannot avoid all spurious signals by using the avoid spurious function.
NOTE
Procedures for controlling spurious avoidance function
Follow the steps below to control the spurious avoidance function.
Step 1. Press
Step 2. Press
Even if the frequency-offset function is turned
NOTE
external signal source (
NOTE If the
Swept

4. Changing Frequency Data

The frequency-offset function offers the capability to change the frequency data of each
trace to any desired frequency.
Procedures for changing frequency data
Step 1. Press
which you want to change the frequency.
Step 2. Press
Chapter 8
-
Frequency Offset
to turn it ON.
Avoid Spurious
LO Frequency
is selected for the
Swept Sweep Mode
to , and from
Std Stepped Fast Swept
(or
-
Frequency Offset
Frequency-Offset Measurement (Option 008)
to display the "Frequency Offset Menu."
, the function is available when the
OFF
) is .
ON
, it will be changed to
to ).
Fast Stepped
) and (or
to display the "Frequency Offset Menu."
Measurement of Mixers
(from
Stepped Std
) to activate the trace for
321