Specifying The Display Position Of Marker Values - Agilent Technologies ENA Series User Manual

Data Analysis
Analyzing Data on the Trace Using the Marker

Specifying the display position of marker values

This section describes how to specify the marker value display position as a percentage for
each active trace.
Figure 6-5 Marker coupling
Marker Info X Pos
Marker Info Y Pos
Operational procedure
Step 1. Press
marker coupling.
Step 2. Press
Step 3. Press
Step 4. Ptress
Step 5. Press
260
Specifies the horizontal display position by the width of the display
area as a percentage.
Specifies the vertical display position by the height of the display area
as a percentage.
(or
.
.
Annotation Options
to set the horizontal display position.
Marker Info X Pos
to set the vertical display position.
Marker Info Y Pos
) to activate the channel for which you want to set
Chapter 6