Executing User-Characterized Ecal - Agilent Technologies ENA Series User Manual

Executing User-characterized ECal

The execution procedure for the User-characterized ECal is the same as for normal ECal
except that it requires the user characteristics to be selected in advance.
Follow these steps to select the user characteristics.
Step 1. Press or
calibration.
Step 2. Press .
Step 3. Press .
ECal
Step 4. Press
Characterization
Step 5. Select a user characteristic according to the list below.
Softkey
Factory
User1
User2
User3
User4
User5
Step 6. To check the information on the user characteristics you have selected, press
Characterization Info
Chapter 4
to select the channel for which you want to execute
.
Function
Factory-default characteristic (for normal ECal)
User characteristic stored at location number 1 in ECal's flash memory
User characteristic stored at location number 2 in ECal's flash memory
User characteristic stored at location number 3 in ECal's flash memory
User characteristic stored at location number 4 in ECal's flash memory
User characteristic stored at location number 5 in ECal's flash memory
. The dialog box shown in Figure 4-51 appears.
Calibration
User-characterized ECal
177