Turning The Limit Test On/Off - Agilent Technologies ENA Series User Manual

Limit Test
Limit Test

Turning the limit test ON/OFF

You can set the limit test ON/OFF for each trace individually.
Setting the limit test ON/OFF
The following steps explain how to set the limit test ON/OFF.
Step 1. Press
will be used.
Step 2. Press or
used.
Step 3. Press to display the Analysis menu.
Step 4. Press to display the Limit Test menu.
Limit Test
Softkey
Limit Test
Limit Line
Edit Limit Line
*1.To use the limit test function, you must first define the limit line. For more on how to
define the limit line, see "Defining the limit line" on page 376.
Step 5. Press to turn the limit test ON. To display the limit line on the screen, press
Limit Test
.
Limit Line
380
or to activate the channel on which the limit test function
to activate the trace on which the limit test function will be
Function
Sets the limit test ON/OFF.
Sets the limit line display ON/OFF.
Opens the limit table for editing the limit line.
*1
Chapter 11