Parameter Setting For Each Setup Item (Analyzer, Channel, Trace) - Agilent Technologies ENA Series User Manual

Parameter setting for each setup item (analyzer, channel, trace)

Table 3-2 lists the setting parameters and indicates the setup item (analyzer, channel, or
trace) that each parameter controls along with the applicable setup key(s).
Table 3-2 Parameters and setup items they control
Parameter
Stimulus Settings
Sweep range
Power, CW frequency
Sweep time/Sweep delay time
Number of points
Segment sweep
Sweep mode
Trigger Settings
Trigger source
Trigger mode
Response Settings
Measurement parameter
Data format
Scale, Electrical delay, Phase offset
Memory trace and data math
Window title
Graticule label in rectangular form
Color inversion
Frequency display ON/OFF
Display update ON/OFF
Averaging
Smoothing
Chapter 3
Controlled Setup Items
Analyzer Channel Trace
√
√
√
√
√
√
√
√ *1
( )
√
√
*2
√
(
√
√
√
√
√
√
√
√
Setting Measurement Conditions
Setting Channels and Traces
Setup Key(s)
-
Power
-
Sweep Time
-
Points
-
Sweep Type
/ /
Edit Segment Table Segment Display
-
Sweep Mode
-
Trigger Source
-
Hold/Hold All Channels
/
Continuous/Continuous Disp Channels
)
- / Data → Mem
Display
-
Edit Title Label
/
Title Label (ON/OFF)
-
Graticule Label (ON/OFF)
-
Invert Color
-
Frequency (ON/OFF)
-
Update (ON/OFF)
-
Averaging Restart
/ /
Avg Factor Averaging (ON/OFF)
-
Smo Aperture
/
Smoothing (ON/OFF)
/
Sweep Delay
/ /
Restart Trigger
/
Single
/
Data Math
67