Mkr/Analysis Block; Test Port - Agilent Technologies ENA Series User Manual

Overview of Functions
Front Panel: Names and Functions of Parts

10. MKR/ANALYSIS Block

A group of keys used for analyzing the measurement results by using the markers, fixture
simulator, etc. For more on the functions of the keys in the MKR/ANALYSIS block, see
Chapter 2 "Overview of Functions" in the User's Guide.

11. Test Port

The port to which the DUT is connected. Options 213 and 214 each have two ports,
Options 314 and 314 each have three ports, and Options 413 and 414 each have four ports.
While signals are being output from a test port, the yellow LED above the test port is lit.
Connector type: 50 Ω, N-type, female
CAUTION Do not apply DC voltage or current to the test port. Applying DC voltage or current may
lead to device failure. In particular, the capacitor might remain charged. Connect the
measurement sample (DUT) to the test port (or the test fixture, cables, etc. connected to the
test port) after the analyzer has been completely discharged.
The test ports comply with Installation Category I of IEC 61010-1.
38
Displays the "Marker Menu" on page 695 on the right
Key
side of the screen. Manipulating the "Marker Menu"
enables you to turn the markers on/off and move them by
entering stimulus values. You can place up to 10 markers
on each trace.
Displays the "Marker Search Menu" on page 698 on the
Key
right side of the screen. Manipulating the "Marker Search
Menu" enables you to move a marker to a specific point
(maximum, minimum, peak, and a point with a target
value) on a trace. You can also find the bandwidth
parameters (up to six) and display them.
Displays the "Marker Function Menu" on page 697 on the
Key
right side of the screen. Manipulating the "Marker
Function Menu" enables you to not only specify the
marker sweep range and the coupling of markers on a
channel but also to display statistics data on traces.
Displays the "Analysis Menu" on page 647 on the right
Key
side of the screen. Manipulating the "Analysis Menu"
enables you to use the analytical function called the
fixture simulator.
Chapter 2