Defining The Limit Line - Agilent Technologies ENA Series User Manual

Rf network analyzers

Hide thumbs Also See for ENA Series:

Table of Contents

Defining the limit line

To use the limit test, you must first define the limit line. You can define a limit table for

each trace, and you can define up to 100 limit lines (segments) in a limit table.

Defining a segment

The following steps describe how to define a segment.

Step 1. Press

will be used.

Step 2. Press

Step 3. Press

to display the Analysis menu.

Step 4. Press

to display the softkeys associated with the limit test.

Step 5. Press

Edit Limit Line

create/edit a segment. Initially, no segments are entered in the limit table.

At the same time, the Edit Limit Line menu used to create/edit the limit table is displayed.

The following lists the functions that correspond to the softkeys shown.

Clear Limit Table

Export to CSV File

Import from CSV File

to activate the channel on which the limit test function

to activate the trace on which the limit test function will be

to display the limit table shown in Figure 11-3. Using the limit table,

Deletes the segment containing the selected cell from the limit table.

Adds a segment before the segment containing the selected cell to the

limit table.

Clears all of the limit table data.

Exports the limit table to a file in CSV (comma-separated value)

format. For more information, see "Saving/calling the limit table" on

Imports a limit table saved in CSV (separated-separated value)

format. For more information, see "Saving/calling the limit table" on

Exits the Edit Limit Line menu and closes the limit table display.

E5070b E5071b