Displaying Judgment Result Of Limit Test - Agilent Technologies ENA Series User Manual

Displaying judgment result of limit test

Judgment result of measurement points and trace
Measurement points that fail are displayed in red on the screen. The judgment result of the
trace is indicated by Pass or Fail displayed in the upper right part of the graph.
Figure 11-1 Result display of measurement points and trace
Judgment result of channels
If a channel has a judgment result of fail, the message shown in Figure 11-2 appears on the
screen (it will be judged as failed if one or more unsatisfactory trace exists in any of the
limit test, the ripple test or the bandwidth test within the channel.)
Figure 11-2 Channel fail message
Follow these steps to turn on/off the display of the channel fail message.
Step 1. Press
Step 2. Press
Step 3. Press
Chapter 11
.
.
Limit Test
. Each press toggles between on/off.
Fail Sign
Limit Test
Limit Test
375