Softkey Functions
Calibration Menu
Key Operation
(Continued)
Port Extensions
Auto Port
Extension
Enables/disables the function to use the DC loss value for the
Adjust Mismatch
calculation.
Enables/disables the loss value calculation.
Include
Returns to the softkey display screen one level higher.
Return
Enables or disables the port extension function.
Extensions
Sets the value for test port 1 extension (sec.).
Extension Port 1
Sets the value for test port 2 extension (sec.).
Extension Port 2
Sets the value for test port 3 extension (sec.).
*1
Extension Port 3
*2
Sets the value for test port 4 extension (sec.).
Extension Port 4
Sets the loss value.
Loss
Display the softkey to select the test port.
Select Ports
Select test port 1.
Port 1
Select test port 2.
Port 2
Select test port 3.
Port 3
Select test port 4.
Port 4
Returns to the softkey display screen one level higher.
Return
Toggles on/off loss 1 on the selected port.
Loss1
Sets the loss value of loss 1 on the selected port.
Loss1
Sets the frequency of loss 1 on the selected port.
Freq1
Toggles on/off the loss 2 on the selected port.
Loss2
Sets the loss value of the loss 2 on the selected port.
Loss2
Sets the frequency of the loss 2 on the selected port.
Freq2
Sets the DC loss value.
Loss at DC
Returns to the softkey display screen one level higher.
Return
Returns to the softkey display screen one level higher.
Return
Sets the velocity factor.
Velocity Factor
Sets the system characteristic impedance value.
Set Z0
682
Function
SCPI Command
:SENS{1-16}:CORR:EXT:AUTO:DCOF
:SENS{1-16}:CORR:EXT:AUTO:LOSS
:SENS{1-16}:CORR:EXT
:SENS{1-16}:CORR:EXT:PORT 1
:SENS{1-16}:CORR:EXT:PORT 2
:SENS{1-16}:CORR:EXT:PORT 3
:SENS{1-16}:CORR:EXT:PORT 4
None
None
None
None
:SENS{1-16}:CORR:EXT:PORT{1-4}:INCL1
:SENS{1-16}:CORR:EXT:PORT{1-4}:LOSS1
:SENS{1-16}:CORR:EXT:PORT{1-4}:FREQ1
:SENS{1-16}:CORR:EXT:PORT{1-4}:INCL2
:SENS{1-16}:CORR:EXT:PORT{1-4}:LOSS2
:SENS{1-16}:CORR:EXT:PORT{1-4}:FREQ2
:SENS{1-16}:CORR:EXT:PORT{1-4}:LDC
:SENS{1-16}:CORR:RVEL:COAX
:SENS:CORR:IMP
Appendix D