Sweep Setup Menu - Agilent Technologies ENA Series User Manual

Sweep Setup Menu

Key Operation
Displays softkeys for setting up sweeps.
Displays the menu to set the stimulus signal output.
Power
Sets the output power level of the internal signal source of the analyzer.
Power
*1 Displays softkeys for selecting the power range.
Power Ranges
Sets the power range to -20 dBm to 10 dBm.
-20 to 10
Sets the power range to -25 dBm to 7 dBm.
-25 to 7
Sets the power range to -30 dBm to 2 dBm.
-30 to 2
Sets the power range to -35 dBm to -3 dBm.
-35 to -3
Sets the power range to -40 dBm to -8 dBm.
-40 to -8
Sets the power range to -45 dBm to -13 dBm.
-45 to -13
Sets the power range to -50 dBm to -18 dBm.
-50 to -18
Sets the power range to -55 dBm to -23 dBm.
-55 to -23
Returns to the softkey display screen one level higher.
Cancel
Turn on/off of AUTO Power Range function.
Auto Range
Turns on/off the port coupling for the power level.
Port Couple
Displays the softkey to set the power level for each port when the port coupling is off.
Port Power
Sets the power level of port 1.
Port 1 Power
Sets the power level of port 2.
Port 2 Power
Sets the power level of port 3.
Port 3 Power
Sets the power level of port 4.
Port 4 Power
Sets the correction coefficient (correction amount of power level per 1
Slope [xx dB/GHz]
GHz) when the power slope feature is on.
Turns on/off of the power slope feature.
Slope [ON/OFF]
Sets the fixed frequency for the power sweep.
CW Freq
Turns on/off of the stimulus signal output.
RF Out
Returns to the softkey display screen one level higher.
Return
Sets the sweep time for each source port. Inputting the value "0" as the
Sweep Time
sweep time causes the analyzer to go into automatic sweep time mode.
Sets the wait (delay) time before starting a sweep for each source port.
Sweep Delay
Displays softkeys for selecting the sweep mode.
Sweep Mode
Selects the stepped mode.
Std Stepped
Selects the swept mode.
Std Swept
Selects the fast stepped mode.
Fast Stepped
Selects the fast swept mode.
Fast Swept
Returns to the softkey display screen one level higher.
Cancel
Sets the number of points per sweep. The number of points should be from
Points
2 to 1601.
Displays softkeys for selecting the sweep type.
Sweep Type
Selects linear frequency sweep.
Lin Freq
Selects logarithmic frequency sweep.
Log Freq
Selects segment sweep.
Segment
Selects power sweep.
Power Sweep
Appendix D
Function
Softkey Functions
Sweep Setup Menu
SCPI Command
:SOUR{1-16}:POW
:SOUR{1-16}:POW:ATT 0
:SOUR{1-16}:POW:ATT 5
:SOUR{1-16}:POW:ATT 10
:SOUR{1-16}:POW:ATT 15
:SOUR{1-16}:POW:ATT 20
:SOUR{1-16}:POW:ATT 25
:SOUR{1-16}:POW:ATT 30
:SOUR{1-16}:POW:ATT 35
:SOUR{1-16}:POW:ATT:AUTO
:SOUR{1-16}:POW:PORT:COUP
:SOUR{1-16}:POW:PORT1
:SOUR{1-16}:POW:PORT2
:SOUR{1-16}:POW:PORT3
:SOUR{1-16}:POW:PORT4
:SOUR{1-16}:POW:SLOP
:SOUR{1-16}:POW:SLOP:STAT
:SENS{1-16}:FREQ
:OUTP
:SENS{1-16}:SWE:TIME
:SENS{1-16}:SWE:TIME:AUTO
:SENS{1-16}:SWE:DEL
:SENS{1-16}:SWE:GEN STEP
:SENS{1-16}:SWE:GEN ANAL
:SENS{1-16}:SWE:GEN FST
:SENS{1-16}:SWE:GEN FAN
:SENS{1-16}:SWE:POIN
:SENS{1-16}:SWE:TYPE LIN
:SENS{1-16}:SWE:TYPE LOG
:SENS{1-16}:SWE:TYPE SEG
:SENS{1-16}:SWE:TYPE LOG
715