Agilent Technologies ENA Series User Manual page 655

Key Operation
(Continued)
Fixture Simulator
*1
Topology
Port2 (bal)
Selects test ports 4 and 1 on the analyzer for connection with (balanced)
*2
4-1
port 2 on the DUT (ports b and c for
Table 7-8 on page 294) respectively.
Selects test ports 4 and 2 on the analyzer for connection with (balanced)
*2
4-2
port 2 on the DUT (ports b and c for
Table 7-8 on page 294) respectively.
*2 Selects test ports 4 and 3 on the analyzer for connection with (balanced)
4-3
port 2 on the DUT (ports b and c for
Table 7-8 on page 294) respectively.
Returns to the softkey display screen one level higher.
Cancel
Displays softkeys for selecting the analyzer port (test port) to which (single-end) port 2 on the DUT will be
*2
Port2 (se)
connected. This key will be displayed only when
Selects test port 1 on the analyzer for connection with (single-end) port 2 on
1
the DUT.
Selects test port 2 on the analyzer for connection with (single-end) port 2 on
2
the DUT.
Selects test port 3 on the analyzer for connection with (single-end) port 2 on
3
the DUT.
Selects test port 4 on the analyzer for connection with (single-end) port 2 on
4
the DUT.
Returns to the softkey display screen one level higher.
Cancel
Displays softkeys for selecting the analyzer ports (test ports) to which (balanced) port 3 on the DUT will be
*2
Port3 (bal)
connected. This key will be displayed only when
Selects test ports 1 and 2 on the analyzer for connection with (balanced)
1-2
port 3 on the DUT (ports c and d in Table 7-8 on page 294) respectively.
Selects test ports 1 and 3 on the analyzer for connection with (balanced)
1-3
port 3 on the DUT (ports c and d in Table 7-8 on page 294) respectively.
Selects test ports 1 and 4 on the analyzer for connection with (balanced)
1-4
port 3 on the DUT (ports c and d in Table 7-8 on page 294) respectively.
Selects test ports 2 and 1 on the analyzer for connection with (balanced)
2-1
port 3 on the DUT (ports c and d in Table 7-8 on page 294) respectively.
Selects test ports 2 and 3 on the analyzer for connection with (balanced)
2-3
port 3 on the DUT (ports c and d in Table 7-8 on page 294) respectively.
Selects test ports 2 and 4 on the analyzer for connection with (balanced)
2-4
port 3 on the DUT (ports c and d in Table 7-8 on page 294) respectively.
Selects test ports 3 and 1 on the analyzer for connection with (balanced)
3-1
port 3 on the DUT (ports c and d in Table 7-8 on page 294) respectively.
Selects test ports 3 and 2 on the analyzer for connection with (balanced)
3-2
port 3 on the DUT (ports c and d in Table 7-8 on page 294) respectively.
Selects test ports 3 and 4 on the analyzer for connection with (balanced)
3-4
port 3 on the DUT (ports c and d in Table 7-8 on page 294) respectively.
Selects test ports 4 and 1 on the analyzer for connection with (balanced)
4-1
port 3 on the DUT (ports c and d in Table 7-8 on page 294) respectively.
Selects test ports 4 and 2 on the analyzer for connection with (balanced)
4-2
port 3 on the DUT (ports c and d in Table 7-8 on page 294) respectively.
Appendix D
Function
or ports c and d for
SE-Bal Bal-Bal
or ports c and d for
SE-Bal Bal-Bal
or ports c and d for
SE-Bal Bal-Bal
in the
SE-SE-Bal Device
in the
SE-SE-Bal Device
Softkey Functions
Analysis Menu
SCPI Command
:CALC{1-16}:FSIM:BAL:TOP:BBAL
:CALC{1-16}:FSIM:BAL:TOP:SBAL
in
:CALC{1-16}:FSIM:BAL:TOP:BBAL
:CALC{1-16}:FSIM:BAL:TOP:SBAL
in
:CALC{1-16}:FSIM:BAL:TOP:BBAL
:CALC{1-16}:FSIM:BAL:TOP:SBAL
in
menu is selected.
:CALC{1-16}:FSIM:BAL:TOP:SSB
:CALC{1-16}:FSIM:BAL:TOP:SSB
:CALC{1-16}:FSIM:BAL:TOP:SSB
:CALC{1-16}:FSIM:BAL:TOP:SSB
menu is selected.
:CALC{1-16}:FSIM:BAL:TOP:SSB
:CALC{1-16}:FSIM:BAL:TOP:SSB
:CALC{1-16}:FSIM:BAL:TOP:SSB
:CALC{1-16}:FSIM:BAL:TOP:SSB
:CALC{1-16}:FSIM:BAL:TOP:SSB
:CALC{1-16}:FSIM:BAL:TOP:SSB
:CALC{1-16}:FSIM:BAL:TOP:SSB
:CALC{1-16}:FSIM:BAL:TOP:SSB
:CALC{1-16}:FSIM:BAL:TOP:SSB
:CALC{1-16}:FSIM:BAL:TOP:SSB
:CALC{1-16}:FSIM:BAL:TOP:SSB
649