Selecting The E5091A Model; Assigning Test Ports - Agilent Technologies ENA Series User Manual

Selecting the E5091A Model

Select the E5091A model you want to set. For the E5091A-016, you can select the 13-port
device or 16-port device function.
Softkey
E5091_9
E5091_13
E5091_16
Step 1. Press
Step 2. After the execution of "Selecting ID for E5091A" on page 476, select the model by
pressing
NOTE If the model you use and the selected softkey is different, the configuration will not be
reflected. Also, no error message will appear. For the correlation between the model and
the softkey, refer to the Table 14-2.
Table 14-2 The Model you use and the softkey you select
E5091A-009
E5091A-016

Assigning test ports

Before calibration and measurement, you need to assign the test ports of the E5091A. You
can set the connection ports for each channel and perform measurement while switching
the connection for each channel.
Operational procedure
Step 1. Press
Step 2. Press
connection ports.
Step 3. Use the corresponding softkey to assign the test ports for the connection between the
E5091A and the interconnection ports.
NOTE The port name of the softkey indicates the E5091A interconnection port.
Table 14-3 When the E5091A-009 is Connected
Softkey
Port1
Chapter 14
Model
Select the E5091A option 009.
Select the E5091A option 016 for the 13-port device function.
Select the E5091A option 016 for the 16-port device function.
- to display the E5091A setup menu.
E5091A Setup
.
Select Test Set
E5091_009
Yes
No
-
Multiport Test Set Setup
(or ) to activate the channel for which you want to set the
Function
Selects a test port of the E5091A to which you want to connect port 1 of the
E5091A. You can select the port from
E5091_013 E5091_016
No No
Yes Yes
to display the E5091A setup menu.
*1
or .
A T1
Controlling E5091A
Setting the E5091A
477