Agilent Technologies ENA Series User Manual page 685

Key Operation
(Continued)
Modify Cal Kit
Specify CLSs
Displays softkeys for selecting standards for the OPEN standard class.
Open
Displays softkeys for selecting standards for the OPEN standard class that applies to
Set All
Does not include
None
Includes
1. (Std 1. (Std Name)
Name)
Includes
2. (Std 2. (Std Name)
Name)
.
.
Includes
21. (Std 21. (Std Name)
Name)
Returns to the softkey display screen one level higher.
Cancel
Displays softkeys for selecting standards for the OPEN standard class that applies only to test port 1. The
Port 1
lower-level softkeys are the same as those for
Displays softkeys for selecting standards for the OPEN standard class that applies only to test port 2. The
Port 2
lower-level softkeys are the same as those for
Displays softkeys for selecting standards for the OPEN standard class that applies only to test port 3. The
*1
Port 3
lower-level softkeys are the same as those for
*2 Displays softkeys for selecting standards for the OPEN standard class that applies only to test port 4. The
Port 4
lower-level softkeys are the same as those for
Returns to the softkey display screen one level higher.
Return
Displays softkeys for selecting standards for the SHORT standard
Short
class. The lower-level softkeys displayed are the same as those for
.
Open
Displays softkeys for selecting standards for the LOAD standard
Load
class. The lower-level softkeys displayed are the same as those for
.
Open
Appendix D
Function
in the OPEN standard class.
1. (Std Name)
in the OPEN standard class.
in the OPEN standard class.
.
.
in the OPEN standard class.
.
Set All
.
Set All
.
Set All
.
Set All
Softkey Functions
Calibration Menu
SCPI Command
:SENS{1-16}:CORR:COLL:CKIT:ORD:THRU
x,y,0
:SENS{1-16}:CORR:COLL:CKIT:ORD:OPEN
x,1
:SENS{1-16}:CORR:COLL:CKIT:ORD:OPEN
x,2
.
.
:SENS{1-16}:CORR:COLL:CKIT:ORD:OPEN
x,21
:SENS{1-16}:CORR:COLL:CKIT:ORD:SHOR
:SENS{1-16}:CORR:COLL:CKIT:ORD:LOAD
679