Agilent Technologies ENA Series User Manual page 53

Overview of Functions
Screen Area: Names and Functions of Parts
5-1. Channel Title Bar
You can assign a title to each channel and have the title displayed on the bar. For more on
setting up a channel title bar, see "Labeling a window" on page 89.
5-2. Trace Name/Measurement Parameter
The names of the traces (Tr1 through Tr9)on the channel and their measurement
parameters are displayed here. to the right of the trace name indicates the active trace
(the trace for which setup is being performed). To make a trace active, use or
. Clicking the line where the trace name is placed (the mouse pointer changes
from to ) also makes a trace active.
When an equation label is input using the equation editor, the measurement parameter
changes to the equation label. For details, refer to "Entering the equation label" on page
.
279
5-3. Data Format
The data format of each trace is displayed here. For more on setting up data formats, see
"Selecting a Data Format" on page 81.
5-4. Scale Settings
The scale setting for each trace is displayed here. This example shows that "0.00dB/"
corresponds to 10 dB per division. "Ref 0.000dB" shows that the value of the reference line
is 0 dB. For more on setting scales, see "Setting the Scales" on page 85.
Chapter 2 47