Setting Channel Display (Layout Of Channel Windows) - Agilent Technologies ENA Series User Manual

Rf network analyzers

Hide thumbs Also See for ENA Series:

Table of Contents

Setting Measurement Conditions

Setting Channels and Traces

Step 5. Press

Setting channel display (layout of channel windows)

The measurement result for each channel is displayed in its dedicated window (channel

window). You cannot have a single window display the measurement results from more

than one channel. This means that the setting of the window layout determines the number

of channels displayed on screen.

The execution of measurement for each channel does not depend on how the channel is

displayed (channels that are not displayed can be measured). For information on executing

measurement for each channel (trigger mode and trigger source), refer to Chapter 5,

"Making Measurements," on page 241.

The procedure for setting the window layout is as follows:

Step 1. Press

Step 2. Press

Step 3. Press the desired softkey to select the window layout (refer to Figure 3-1).

. The dialog box that prompts you to restart the firmware appears. Click the

button to restart the firmware.

Allocate Channels

E5070b E5071b