Setting Up Markers For Each Trace/Setting Up Markers For Coupled Operations Between Traces - Agilent Technologies ENA Series User Manual

Data Analysis
Analyzing Data on the Trace Using the Marker
Setting up markers for each trace/Setting up markers for coupled
operations between traces
Makers can be set up and moved either in coupled operation for all traces in a channel or
independently for each trace.
Figure 6-3 Marker coupling
Marker Couple is on
(
Marker Couple is off
(
Turning Marker Coupling On or Off
Step 1. Press
will be set.
Step 2. Press
Step 3. Press
258
)
Coupling ON
)
Coupling OFF
(or
.
to turn the marker coupling on or off.
Couple
Markers are set up and moved in coupled operation on all traces in a
channel.
Markers are set up and moved independently for each trace.
) to activate the channel on which the marker couple
Chapter 6