Analysis in Time Domain (Option 010)
Characteristics of Response in Time Domain
Identifying mismatch type
The transformation in the low pass mode simulates the response in the TDR measurement.
In addition to mismatch locations, the response includes information on the mismatch type.
Figure 9-12 shows each mismatch type and the response waveform corresponding to it. In
the low pass mode, you can simulate the response of the step signal and the impulse signal.
From the viewpoint of mathematics, the response of the impulse signal is the waveform
obtained by differentiating the response of the step signal.
Figure 9-12
Mismatch type and response in low pass mode
350
Chapter 9