Screen Area: Names And Functions Of Parts; Menu Bar; Data Entry Bar - Agilent Technologies ENA Series User Manual

Overview of Functions

Screen Area: Names and Functions of Parts

Screen Area: Names and Functions of Parts
This section describes the names and functions of parts on the LCD screen of the
E5070B/E5071B.
Figure 2-2 Screen display

1. Menu Bar

By using the mouse and keyboard to manipulate the menu bar, you can perform interface
operations that are equivalent to those of the keys in the ACTIVE CH/TRACE block,
RESPONSE block, STIMULUS block, MKR/ANALYSIS block, and INSTR STATE block
on the front panel of the E5070B/E5071B. The menus on the menu bar correspond to the
key blocks, and their submenus to the hardkeys inside the key blocks.

2. Data Entry Bar

Used to enter numeric data into the E5070B/E5071B. Press a hardkey or softkey to enter
data, and the data entry bar will appear at the top of the screen. To assign a title to a channel
window, an entry bar that allows you to enter letters and symbols by using the front panel
keys or mouse is displayed instead.
40 Chapter 2