Front Usb Port; Ground Terminal - Agilent Technologies ENA Series User Manual

Rf network analyzers

Hide thumbs Also See for ENA Series:

Table of Contents

Overview of Functions

Front Panel: Names and Functions of Parts

12. Front USB Port

A USB (Universal Serial Bus) port (number of parts: 1) specifically installed for an ECal

(Electronic Calibration) module, a USB/GPIB interface, a multiport test set or a printer.

Connecting a designated ECal module to this port enables ECal measurements to be taken.

Connecting a compatible printer to this port enables screen information on the

E5070B/E5071B to be printed. For more on executing ECal measurements, see Chapter 4,

"Calibration," on page 93, and for printing, see "Printing Displayed Screen" on page 369.

The specifications of this port are identical to those of the "14. Rear USB port" on page 57.

We do not support connections to the USB port of devices other than designated printers,

ECal modules, the USB/GPIB interface, and multiport test sets.

Connected to the chassis of the E5070B/E5071B. You can connect a banana-type plug to

this terminal for grounding.

E5070b E5071b