Related Manuals for Agilent Technologies E4980A
Summary of Contents for Agilent Technologies E4980A
- Page 1 Agilent E4980A Precision LCR Meter E4980A Data Transfer Program Operation Manual Rev.01.20 July 2011...
-
Page 2: Sample Program
SAMPLE PROGRAMS solely and exclusively for their own purpose and shall not license, lease, market, or distribute the SAMPLE PROGRAMS or modification of any part thereof. Agilent Technologies shall not be liable for the quality, performance, or behavior of the SAMPLE PROGRAMS. Agilent Technologies especially disclaims any responsibility for the operation of the SAMPLE PROGRAMS to be uninterrupted or error-free. - Page 3 * Agilent I/O Libraries Suite 16 or higher installed • Connection cable (Use either one of the following cables) 1. USB cable (type mini-B for E4980A side and type A male for PC side, furnished as an E4980A standard accessory) 2.
- Page 4 1. Set the measurement conditions for the list sweep, then perform the compensation. The E4980A can sweep frequency, test signal level, DC bias signal level, DC source level up to 201 points with the list sweep function by pressing Meas Setup hardkey > LIST SETUP softkey.
- Page 5 3. Perform the single trigger measurement with the DUT by pressing Display Format hardkey > LIST SWEEP softkey > Trigger hardkey 4. Open “E4980A_DataTransfer_xxxx.xls” on the PC. Since this file contains macros, enable “Macros” to boot the program, then follow the “Step-1” and the “Step-2” in the “Main” sheet. 5.
- Page 6 Revision History Revision Date Description 01.20 2011/7/5 Function added to return to local mode automatically Function added to show measurement mode as graph title Evaluated under Windows 7 and Excel 2010 environment Other minor improvements implemented 01.00 2010/2/22 Initial revision...