Aligning Maker Value Displays - Agilent Technologies ENA Series User Manual

Aligning maker value displays

This section describes how to align maker value displays.
Figure 6-6 Marker coupling
On
(
Align ON
Off
(
Align OFF
Operational procedure
Step 1. Press
Step 2. Press
Step 3. Press
Chapter 6
Displays marker values to align to the display position of trace 1.
)
Displays marker values in the display position defined for each trace.
)
.
.
Annotation Options
to toggle on/off.
Align
Analyzing Data on the Trace Using the Marker
Data Analysis
261