Selecting A Data Format; Rectangular Display Formats - Agilent Technologies ENA Series User Manual

Selecting a Data Format

The E5070B/E5071B allows you to display measured S-parameters by using the following
data formats:

Rectangular display formats

•
•
•
•
•
•
•
•
•
Polar format
Smith chart format
Rectangular display formats
Rectangular display formats draw traces by assigning stimulus values (linear scale) to the
X-axis and response values to the Y-axis (Figure 3-8). Eight different formats are available
depending on the selection of data for the Y-axis (Table 3-3).
Figure 3-8 Rectangular display format
Chapter 3
Log magnitude format
Phase format
Expanded phase format
Positive phase format
Group delay format
Linear magnitude format
SWR format
Real format
Imaginary format
Setting Measurement Conditions
Selecting a Data Format
81