Initializing The Limit Table - Agilent Technologies ENA Series User Manual

Rf network analyzers

Hide thumbs Also See for ENA Series:

Table of Contents

Step 4. Press

to display the Ripple Limit menu.

Ripple Limit

Ripple Limit

Ripple Value

Ripple Value Band

Edit Ripple Limit

*1.To use the ripple test function, you must first define the ripple limit. For more on how to

define the ripple limit, see "Configuring ripple limit" on page 385.

Step 5. Press

to turn the ripple test ON. You can display the limit lines on the screen

by turning on

Ripple Limit

Initializing the limit table

The following operations initialize the limit table.

When presetting

When calling a ripple table with zero frequency bands

Clear Limit Table

Sets the ripple test ON/OFF.

Sets the ripple limit line display ON/OFF.

Sets how the ripple values are displayed. Available settings are off,

absolute value (difference between maximum and minimum values

within the band) display, and margin (difference between absolute value

of ripple and ripple limit) display.

Selects the band for which you want to display the ripple value.

Opens the ripple limit table for editing the ripple limit.

is pressed in the Edit Ripple Limit menu

E5070b E5071b