Procedure - Agilent Technologies ENA Series User Manual

Calibration
Enhanced Response Calibration
Figure 4-14 Connecting the Standard at Enhanced Response Calibration

Procedure

Step 1. Press
calibration.
Step 2. Press
Step 3. Press
Step 4. Press
Step 5. Press
performed.
Softkey display
2-1(S21 S11)
3-1(S31 S11)
4-1(S41 S11)
1-2(S12 S22)
3-2(S32 S22)
4-2(S42 S22)
1-3(S13 S33)
2-3(S23 S33)
4-3(S43 S33)
116
or
.
.
Calibrate
.
Enhanced Response
to select the test ports on which an enhanced response calibration will be
Ports
Function
Measure between test ports 1 and 2. selecting port 1 as the output.
Measure between test ports 1 and 3. selecting port 1 as the output.
Measure between test ports 1 and 4. selecting port 1 as the output.
Measure between test ports 2 and 1. selecting port 2 as the output.
Measure between test ports 2 and 3. selecting port 2 as the output.
Measure between test ports 2 and 4. selecting port 2 as the output.
Measure between test ports 3 and 1. selecting port 3 as the output.
Measure between test ports 3 and 2. selecting port 3 as the output.
Measure between test ports 3 and 4. selecting port 3 as the output.
to select the channel for which you want to perform the
Chapter 4