Data Output
Saving and Recalling Instrument State
NOTE
If you recall an incompatible file, an error occurs and the device recovers to the presetting.
Save procedure
Selecting Content to be Saved
NOTE
This setting takes effect both when saving the entire instrument state into a file and when
saving the instrument state for each channel into memory.
Step 1. Press
Step 2. Press
Step 3. Press the softkey corresponding to the content of the instrument state you want to save.
Softkey
State Only
State & Cal
State & Trace
All
Selecting Save Target Channel/Trace
Step 1. Press
Step 2. Press
channel/traces only (
If you specify the displayed channel/traces only as the save target, you can reduce the file
size. However, for channels/traces that are not displayed, you cannot recall and reproduce
the instrument state separately held for each channel/trace at a later time.
354
•
When Files that are saved with different system spec. versions include calibration
data, only states and trace data are recalled.
.
.
Save Type
Function
Selects saving the state of the E5070B/E5071B only
Selects saving the state and calibration data of the E5070B/E5071B
Selects saving the state and traces of the E5070B/E5071B
Selects saving the state, calibration data, and traces of the
E5070B/E5071B
.
and select the save target from all channels/traces (
Channel/Trace
Disp Only
).
) or displayed
All
Chapter 10