Hiding Frequency Information; Labeling A Window - Agilent Technologies ENA Series User Manual

Hiding Frequency Information

You can hide the frequency information from the screen in order to ensure its
confidentiality or for other reasons.
Hiding Frequency Information on the Screen
Follow the steps below to hide frequency information on the measurement screen.
Step 1. Press
Step 2. Press
NOTE Turning off the frequency display using the
display within the Stimulus softkey, which is turned on by pressing
pressing
Hiding Softkey's Frequency Information
You can delete the frequency information from the measurement screen, which changes the
frequency information displayed in the Stimulus softkey and the data entry area for Hz unit
to asterisks (***).
Step 1. Press
Step 2. Press Security Level and select any of the following options for the frequency display.
Softkey
OFF
Low
High

Labeling a window

It is possible to assign a unique name to a channel and display it on the screen. This feature
is useful in saving and/or printing measurement result for future reference.
Labeling a window
Step 1. Press
Step 2. Press
Step 3. Press
The title label input dialog box (see Figure 3-13) appears.
Chapter 3
.
turn off the frequency display.
Frequency
, and . The display of the softkey bar itself can be switched on or off by
.
.
- Service Menu
Function
Displays the frequency information.
Hides the frequency information with a series of asterisks.
This can be turned to OFF by the Security Level menu.
Hides the frequency information with a series of asterisks.
This cannot be turned to OFF by the Security Level menu.
Resetting to OFF is only possible by executig Preset or Recall.
or
.
.
Edit Title Label
Setting Measurement Conditions
Setting Window Displays
key does not erase the frequency
Frequency
to select the channel to be labeled.
, ,
89