Initializing Parameters - Agilent Technologies ENA Series User Manual

Setting Measurement Conditions

Initializing Parameters

Initializing Parameters
The E5070B/E5071B has three different initial settings as shown in Table 3-1 below.
Table 3-1 E5070B/E5071B Initial settings and methods for restoring them
Initial setting
Preset state
*RST state
Factory default setting
The user can set items to be preset freely. For more information, see"Setting the user preset
function" on page 449.
For further details of each setting, refer to Appendix C, "List of Default Values," on
page 629. To restore initial settings using commands, refer to the Programmer's Guide and
VBA Programmer's Guide.
60
*1.Initialization may be executed without displaying the
on the instrument setting state. For more information, see"Showing/hiding the confir-
mation buttons when presetting" on page 449.
Restore method
• Press - on the front panel
OK
or
• Execute the :SYST:PRES command
Execute the *RST command
(how the E5070B/E5071B is set up prior to shipment
from the factory)
or
OK
*1
button, depending
Cancel
Chapter 3