Selecting A Data Format - Agilent Technologies ENA Series User Manual

Setting Measurement Conditions

Selecting a Data Format

Selecting a data format
Use the following procedure to select a data format.
Step 1. Press
which the data format will be set.
Step 2. Press .
Step 3. Press the softkey that corresponds to the desired data format.
Softkey
Log Mag
Phase
Group Delay
-
Smith Lin / Phase
-
Smith Log / Phase
-
Smith Real / Imag
-
Smith R + jX
-
Smith G + jB
-
Polar Lin / Phase
-
Polar Log / Phase
-
Polar Real / Imag
Lin Mag
SWR
Real
Imaginary
Expand Phase
Positive Phase
84
(or ) and
Function
Selects the log magnitude format
Selects the phase format
Selects the group delay format
Selects the Smith chart format (with linear magnitude and phase as the
marker response values)
Selects the Smith chart format (with log magnitude and phase as the
marker response values)
Selects the Smith chart format (with the real and imaginary parts as the
marker response values)
Selects the Smith chart format (with resistance and reactance as the
marker response values)
Selects the Smith chart format (with conductance and susceptance as
the marker response values)
Selects the polar format (with linear magnitude and phase as the marker
response values)
Selects the polar format (with log magnitude and phase as the marker
response values)
Selects the polar format (with the real and imaginary parts as the marker
response values)
Selects the linear magnitude format
Selects the SWR (standing wave ratio) format
Selects the real format
Selects the imaginary format
Selects the expanded phase format
Selects the positive phase format
(or ) to select the trace for
Chapter 3