Siemens HiPath 3000 Series Service Documentation page 1209

Table B-1 Codes for Activating/Deactivating Features
TDM work-
point clients
without dis-
play,
CMI mobile
phones,
Feature
analog work-
point clients
Associated *83+Stn.+
services Services proce-
dure...
Override *62
Room monitor *88
on
Room monitor –
off
Telephone *66+Code
lock on, indi-
vidual
Telephone #66+Code
lock off, indi-
vidual
Change tele- *93+Old
phone lock ac- code+2 x New
cess code code
Reset servic- #0
es/features for
own workpoint
client
Abbreviations:
●
Call states: RH = idle, BR = ready, WA = digit input, BS = busy, RK = incoming call, RG = outgoing call, GS = call
●
Key programming: V = key can be programmed with complete feature, U = key can be programmed to start procedure, T = key with
toggle functionality
●
Menu level: H = Main menu, U1 = 1st submenu, U2 = 2nd submenu
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Operating procedure for
TDM workpoint clients with
S work-
0
display,
point cli-
CMI feature mobile phones,
ents
IP workpoint clients
1
Key
7583 *83... –
– *62 –
7588 *88 –
– – –
7566... *66... – U, T
7666... #66... – U, T
7593... *93... –
760 #0 –
Codes for Activating/Deactivating Features
workpoint cli-
(see abbrevi-
Menu
U – H – AN, DIG, ENT,
S0, CMI, IPSC
V RG U1 – AN, DIG, ENT,
V – H – AN, DIG, ENT,
S0, CMI, IPSC
– – – – AN, DIG, ENT,
S0, CMI, IPSC
RH U1 Fea- AN, DIG, ENT,
ture S0, CMI, IPSC
key
RH, U1 Fea- AN, DIG, ENT,
BR ture S0, CMI, IPSC
key
– – H Local AN, DIG, ENT,
feature S0, CMI, IPSC
menu
– – H – AN, DIG, ENT,
S0, CMI, IPSC
Locking of
feature
Supported
ents
ations in
Table B-2)
X RK,
BS
– –
CMI, IPSC
X WA,
RG,
GS,
RK,
BS
–
– RK,
BS
– RK,
BS
X RK,
BS
x RK,
BS
fcodes.fm
Note
Only for authorized
stations
Only for authorized
stations
Not possible for
workpoint clients
without a speaker-
phone when hand-
set is on-hook
Room monitor off by
hanging up or
pressing the loud-
speaker or release
key
See feature descrip-
tion: Reset activated
features
B-5