Siemens HiPath 3000 Series Service Documentation page 1213

Table B-1 Codes for Activating/Deactivating Features
TDM work-
point clients
without dis-
play,
CMI mobile
phones,
Feature
analog work-
point clients
Hardware set- +/– ...(local pro-
tings cedure for CMI)
Hotel terminal *491+Stn. no.
Hotline –
Send mes- *68+(Stn.
sage (mes- no.)+Text no.
sage waiting)
Cancel/an- #68
swer/display
message
(message
waiting)
Fax waiting Only TDM work-
message/an- point clients
swering ma- with corre-
chine sponding key
Abbreviations:
●
Call states: RH = idle, BR = ready, WA = digit input, BS = busy, RK = incoming call, RG = outgoing call, GS = call
●
Key programming: V = key can be programmed with complete feature, U = key can be programmed to start procedure, T = key with
toggle functionality
●
Menu level: H = Main menu, U1 = 1st submenu, U2 = 2nd submenu
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Operating procedure for
TDM workpoint clients with
S work-
0
display,
point cli-
CMI feature mobile phones,
ents
IP workpoint clients
1
Key
– +/–... X
75491 *491 –
– – –
7568... *68 – V, U
7668 #68 –
– – –
Codes for Activating/Deactivating Features
workpoint cli-
(see abbrevi-
Menu
– – – Local
Key
– – H – AN, DIG, ENT,
S0, CMI, IPSC
– – – – AN, DIG, ENT,
S0, CMI, IPSC
RH, U1 Local AN, DIG, ENT,
RG feature S0, CMI, IPSC
menu
– RH U1 – AN, DIG, ENT,
S0, CMI, IPSC
V – H –
Locking of
feature
Supported
ents
ations in
Table B-2)
ALL – RK
X WA,
RK,
BS,
RG
– –
X RK,
BS
X RK,
BS
DIG, ENT – –
fcodes.fm
Note
From idle state: Call
parameters, speak-
er mode (if avail-
able)
From talk state: Vol-
ume
Activate LED
Hotline destination
is defined for each
individual station in
the CDR.
Without dialing call
number in ringing
state
Suffix dialing not
permitted for DIG,
S0.
Suffix dialing for AN,
ENT, CMI: 0 = de-
lete all sent and re-
ceived messages, 1
= delete all sent
messages, 2 = de-
lete all received
messages, 3 = call
sender.
Feature deleted by
pressing the key
B-9