Familiarizing Yourself With The Hop E Board; Figure 3-1 Components Of Hop E Board - Siemens Hicom Office PhoneMail Supplement To The Installation And System Administration Manual

4890_ecd.fm
Installing a New HOP E Board into an Existing Hicom CS

Familiarizing Yourself With the HOP E Board

Documentation as follows:
– 1 Installation and System Administration Guide.
– 1 Supplement to the Installation and Administration Guide (this manual).
– 2 User Guides.
– 20 Quick Reference Guides.
3.2 Familiarizing Yourself With the HOP E Board
This section replaces Section "Familiarizing Yourself with the Office PhoneMail En-
try Board" in the Hicom Office PhoneMail Entry, Installation and System Administra-
tion Guide .
Figure 3-1 shows an HOP E board and its components.
Service access port
Status indicator
Software load/diagnostic button
Digital station connector
On/off switch
"off" towards status indicator
"on" towards card slot
Card ejection button
Figure 3-1 Components of HOP E Board
3-2
HOP/HOP E, Version 2.0, Supplement to the Installation and System Administration Guide
Card slot
A31003-S1220-D300-3-76D1
ho000021
,
March 2000