Config Filter Dhcp_Server; Show Filter Dhcp_Server - D-Link DGS-1210/ME series Reference Manual

Restrictions
Example usage:
To add an entry from the DHCP server/client filter list in the Switch's database:
DGS-1210-28P/ME:5# config filter dhcp_server add permit server_ip
10.1.1.1 client_mac 00-00-00-00-00-01 ports all
Command: config filter dhcp_server add permit server_ip 10.1.1.1
client_mac 00-00-00-00-00-01 ports all
Success.
DGS-1210-28P/ME:5#

config filter dhcp_server

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the illegal server log suppress duration time to 30 minutes:
DGS-1210-28P/ME:5# config filter dhcp_server illegal_server_log_suppress_duration
30min
Command: config filter dhcp_server illegal_server_log_suppress_duration 30min
Success.
DGS-1210-28P/ME:5#

show filter dhcp_server

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the DHCP server filter list created on the switch:
DGS-1210-28P/ME:5# show filter dhcp_server
Command: show filter dhcp_server
Enabled ports :
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
Only administrator or operate-level users can issue this command.
DHCP se
config filter dhcp_server illegal_server_log_suppress_duration
[1min | 5min | 30min]
The config filter dhcp_server.
[1min | 5min | 30min] – The IP address of the DHCP server to be
filtered.
Only administrator or operate-level users can issue this command.
Used to display current DHCP server/client filter list created on the
switch.
show filter dhcp_server
The show filter dhcp_server command is used to display DHCP
server/client filter list created on the switch.
None.
None.
63