Table 155: Voice Vlan Commands - Edge-Core ECS4110-28T Management Manual

| VLAN Commands
C 37
HAPTER
Configuring Voice VLANs
show mac-vlan
C V
ONFIGURING OICE
E
XAMPLE
The following example assigns traffic from source MAC address 00-00-00-
11-22-33 to VLAN 10.
Console(config)#mac-vlan mac-address 00-00-00-11-22-33 vlan 10
Console(config)#
This command displays MAC address-to-VLAN assignments.
C M
OMMAND ODE
Privileged Exec
C U
OMMAND SAGE
Use this command to display MAC address-to-VLAN mappings.
E
XAMPLE
The following example displays all configured MAC address-based VLANs.
Console#show mac-vlan
MAC Address VLAN ID
----------------- --------
00-00-00-11-22-33
Console#
VLAN
S
The switch allows you to specify a Voice VLAN for the network and set a
CoS priority for the VoIP traffic. VoIP traffic can be detected on switch ports
by using the source MAC address of packets, or by using LLDP (IEEE
802.1AB) to discover connected VoIP devices. When VoIP traffic is detected
on a configured port, the switch automatically assigns the port to the Voice
VLAN. Alternatively, switch ports can be manually configured.

Table 155: Voice VLAN Commands

Command Function
voice vlan Defines the Voice VLAN ID
voice vlan aging Configures the aging time for Voice VLAN ports
voice vlan mac-address Configures VoIP device MAC addresses
switchport voice vlan Sets the Voice VLAN port mode
switchport voice vlan Sets the VoIP traffic priority for ports
priority
switchport voice vlan rule Sets the automatic VoIP traffic detection method for
ports
– 1186 –
Priority
--------
10 0
Mode
GC
GC
GC
IC
IC
IC