Edge-Core ECS4660-28F Management Manual page 888

Hide thumbs Also See for ECS4660-28F:

Table of Contents

| General Commands

(Privileged Exec)

This command returns to Normal Exec mode from privileged mode. In

normal access mode, you can only display basic information on the switch's

configuration or Ethernet statistics. To gain access to all commands, you

must use the privileged mode. See

Privileged Exec

The ">" character is appended to the end of the prompt to indicate that the

system is in normal access mode.

Console#disable

enable (885)

This command restarts the system.

When the system is restarted, it will always run the Power-On Self-

Test. It will also retain all configuration information stored in non-volatile

memory by the copy running-config startup-config command.

Privileged Exec

This command resets the entire system.

This example shows how to reset the switch:

Console#reload

System will be restarted, continue <y/n>? y

"Understanding Command Modes" on

Chapters

Table of Contents