Edge-Core ECS4660-28F Management Manual page 903

switch through hard-wired connections described in the Installation
Guide. Refer to the Installation Guide for information on how to use the
alarm relay contacts and external site alarm inputs.
Major alarms include the failure of all fans, both thermal detectors
◆
exceeding 65°C, or an invalid power module being installed. Minor
alarms include the failure of one or two fans, or when a second power
module is installed but it is not functioning.
E
XAMPLE
The following shows the message types displayed when no alarms are
active, and another example when both minor and major alarms occur.
Console#show alarm-status
Unit 1
Asserted Alarm Input
Current Major Alarm Status:[NONE]
Current Minor Alarm Status:[NONE]
Current Major Alarm Output Status:[INACTIVE]
Current Minor Alarm Output Status:[INACTIVE]
Console#
This command shows memory utilization parameters, and alarm
show memory
thresholds.
C
OMMAND
Normal Exec, Privileged Exec
C
OMMAND
This command shows the amount of memory currently free for use, the
amount of memory allocated to active processes, and the total amount of
system memory.
E
XAMPLE
Console#show memory
Status Bytes
------ ---------- ---
Free
Used
Total
Alarm Configuration
Rising Threshold
Falling Threshold
Console#
R
ELATED
memory (1015)
C
: [NONE]
M
ODE
U
SAGE
%
406712320 75
130158592 25
536870912
: 90%
: 70%
C
OMMANDS
– 903 –
| System Management Commands
24
HAPTER
System Status