Edge-Core ECS4660-28F Management Manual page 924

| System Management Commands
C 24
HAPTER
Line
line
Table 67: Line Commands (Continued)
Command Function
disconnect Terminates a line connection
show line Displays a terminal line's parameters
* These commands only apply to the serial port.
This command identifies a specific line for configuration, and to process
subsequent line configuration commands.
S
YNTAX
line {console | vty}
console - Console terminal line.
vty - Virtual terminal for remote console access (i.e., Telnet).
D S
EFAULT ETTING
There is no default line.
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
Telnet is considered a virtual terminal connection and will be shown as
"VTY" in screen displays such as
communication parameters (e.g., databits) do not affect Telnet
connections.
E
XAMPLE
To enter console line mode, enter the following command:
Console(config)#line console
Console(config-line)#
R C
ELATED OMMANDS
show line (932)
show users (908)
– 924 –
show users. However, the serial
Mode
PE
NE, PE