Table of Contents
Advertisement
| System Management Commands
C
24
HAPTER
Automatic Code Upgrade Commands
upgrade opcode
reload
When specifying a TFTP server, the following syntax must be used,
◆
where filedir indicates the path to the directory containing the new
image:
tftp://192.168.0.1[/filedir]/
When specifying an FTP server, the following syntax must be used,
◆
where filedir indicates the path to the directory containing the new
image:
ftp://[username[:password@]]192.168.0.1[/filedir]/
If the user name is omitted, "anonymous" will be used for the
connection. If the password is omitted a null string ("") will be used for
the connection.
E
XAMPLE
This shows how to specify a TFTP server where new code is stored.
Console(config)#upgrade opcode path tftp://192.168.0.1/sm24/
Console(config)#
This shows how to specify an FTP server where new code is stored.
Console(config)#upgrade opcode path ftp://admin:billy@192.168.0.1/sm24/
Console(config)#
This command reloads the switch automatically after the opcode upgrade is
completed. Use the no form to disable this feature.
S
YNTAX
[no] upgrade opcode reload
D
S
EFAULT
ETTING
Disabled
C
M
OMMAND
ODE
Global Configuration
E
XAMPLE
This shows how to specify a TFTP server where new code is stored.
Console(config)#upgrade opcode reload
Console(config)#
– 922 –
Advertisement
Chapters
Table of Contents
