RADIOMETER ABL800 FLEX Operator's Manual page 97

ABL800 FLEX Operator's Manual
Patient reports,
Editing patient
Step
result layout
(continued)
NOTICE: Refer to the Reference Manual, chapter 6: Parameters, for information
on parameters and their groups.
Continued
Action
To exclude an item from the selected parameter list, highlight it and
6.
press "←"
7. If you wish to display parameters with their reference ranges and have
them checked against reference ranges/critical limits, do the
following:
• Highlight a parameter.
• Press Show Ranges to indicate it by "[xxx-xxx]".
• Repeat for other parameters in the same manner.
If the "[xxx-xxx]" is not included for a parameter, checking against
reference ranges/critical limits is disabled for this parameter.
However, checking against the reportable ranges is always performed.
3. Installation and setup
3-31