RADIOMETER ABL800 FLEX Operator's Manual page 55

ABL800 FLEX Operator's Manual
Analyzer status,
Analyzer Status
elements
(continued)
Quality Control
Status
Reagents
Status
Electrode and
others
System Messages
AutoCheck
Status
Calibrations The Calibrations status gives an overview of the status of the most recently
status performed calibration of each type and relevant messages.
The following information is available on the screen:
Calibration Type
Continued
Button
G
REEN
Y
ELLOW
RED –
G
REEN
Y
ELLOW
G
REEN
Y
ELLOW
G
REEN
Y
ELLOW
R –
ED
G
REEN
Y
ELLOW
Lists each calibration type along with its status:
OK
?
The colors indicate...
– OK.
– error(s) in the last QC measurement and/or
QC schedule reminders.
error-prone parameters are repressed.
– no replacements due at the present time.
– a replacement is due, Calibration/Cleaning
solutions expire soon or Calibration/Cleaning
solutions have expired.
– no replacements due at the present time.
– a replacement is due.
– no (critical) messages.
– non-critical messages.
critical messages. The analyzer cannot
calibrate or measure.
– no replacements due at the present time.
– a replacement is due.
Calibration was accepted.
Error(s) detected during calibration.
Pending or overdue calibration. The last
calibration was accepted.
2. What Is what
Continued on next page
2-29