RADIOMETER ABL800 FLEX Operator's Manual page 120

3. Installation and setup
Replacement setup,
Solution Level
Step
Forecast
(continued)
AutoCheck This program allows you to select the time for a reminder to appear in the System
Replacement Messages in order to fill up the carousel.
Warning
To select time for the reminder, do the following:
Step
3-54
Continued
Action
Select solution level forecasts for other solutions in the same manner.
3.
To reset all solution level forecasts to the default values: α = -1.00 and
4.
β = 100.0, press the
5. Press Close to confirm the settings.
Action
1. Use the up/down arrow buttons to select one of the settings:
No, 1 hour, 2 hours, 4, 8, 12, 24, 48 hours.
2. Press Close to exit the program.
ABL800 FLEX Operator's Manual
−
Set Default button.