Table of Contents
Advertisement
9. Data management
Calibration Log,
Viewing a
To view a calibration result, do the following:
calibration
result
Step
This function allows you to find a calibration or to select a number of calibrations.
Filter function
To set the filter criteria, do the following:
Step
9-18
Continued
Action
1.
Highlight the desired calibration.
2.
Press Result – see chapter 6 for details about calibration results.
Action
1.
Press the Filter button on the Calibration Log screen.
2.
Set the start date by using the 1-day, 7-day, 14-day or 30-day icons.
Or type in the date using the keypad and confirm with Enter.
Change if necessary the end date by highlighting it and typing the date
other than the current date. Confirm with Enter or Select.
3.
Select the desired calibration type and status, using the relevant arrow
buttons.
Confirm each entry with Enter or Select.
4.
When the criteria have been selected, press Apply to start the filter.
ABL800 FLEX Operator's Manual
Continued on next page
Advertisement
Table of Contents
Troubleshooting
