RADIOMETER ABL800 FLEX Operator's Manual page 142

3. Installation and setup
Communications,
Patient Lookup
Step
Setup
(continued)
Remote Support This program allows a remote operator, e.g. a service technician, to log onto your
analyzer and monitor its functions.
To select access, do the following:
Step
NOTICE: To select the access profile for the remote operator – see description in
General Security in Analyzer Security earlier in this chapter.
3-76
Continued
Action
2. Select the number of days you want each patient to be kept in the list,
using the up and down arrow buttons in the box.
Action
1. Press the "Enable remote access" check button to allow a remote
operator to log onto your analyzer.
When connected (logged on), the "Remote operator" appears on the
analyzer status bar.
2. Deactivate the check button to prevent a remote operator logging onto
your analyzer.
ABL800 FLEX Operator's Manual