RADIOMETER ABL800 FLEX Operator's Manual page 132

3. Installation and setup
Analyzer settings,
Acoustic signal The following events are available:
setup
(continued)
Value exceeds critical
range
Close inlet
Result is ready
Inlet is open too long
Beep before
AutoCheck opens
Language This program allows you to select a language of your choice from the list of
languages available on your analyzer.
To change to another language do the following:
Step
3-66
Continued
Event
One of the measured values exceeds the specified
critical limits for that parameter.
The inlet should be closed.
A sample has been analyzed and the results are ready for
viewing.
The inlet should be closed.
A beep sounds to indicate that an AutoCheck
measurement is about to take place.
Action
1. Select the desired language with the arrow buttons.
Press Set Language.
2. Press Continue to continue or press Cancel to continue operating the
analyzer with the language unchanged.
ABL800 FLEX Operator's Manual
Explanation
Continued on next page